Shenzhen Best Bright Technology Co., LIMITED
Integrity, Efficiency, Quality and Service
Add to Cart
Quick Details
20w COB Down Lights
| Model | TD-A020A |
| Power | 20W |
| Input Voltage | AC100~277V 50/60Hz |
| Light Efficiency | >95LM/W |
| Power Factor | >0.96 |
| Total harmonic index | >20% |
| Flux | 1900LM |
| LED lifetime | >50000H |
| Operation temperature | -30℃~+50℃ |
| Color Temperature | Warm light/Day light/Pure light/ Cold light |
| Beam Color | Typical 6000K |
| Color Rendering Index | Typical 75 |
| Housing | Aluminum |
| Cut Size | 170mm |
| Material | Aluminum |
| Light Size | 195*55mm |
| Package | 8 pcs in one carton |
Advantage
More Models
| Model | CUT SIZE | Power | Lumens | Light source | warranty | lifetime |
| TD-A010A | 125mm | 10W | 1000LM | Epistar COB | 3 years | 50000h |
| TD-A015A | 155mm | 15W | 1500LM | Epistar COB | 3 years | 50000h |
| TD-A020A | 170mm | 20W | 2000LM | Epistar COB | 3 years | 50000h |
| TD-A030A | 220mm | 30w | 3000LM | Epistar COB | 3 years | 50000h |
Installation Instructions
●This product should be installed by trained electricians.
● Check integrality of the products when unpack the packing.
●The distance between the light and any flammable materials must not be less than 0.2m. The distance between the upper part of the installed light and the ceiling must not be less than 50px.The light must not be installed into ceilings or walls that contain heat-insulating material.
●The main cable must not connect with the low voltage cable or the surface-mounted lights.
●Guide the lights' connecting cables through the drilled-out hole,and fix the surface-mounted lights with the pre-fitted clips. Make
sure that these are securely connected to the base material.
● When laying the cables, make sure that the cables and plugs
Application Picture
